Feb 27, 2025

Application Of Bag-on-Valve (BOV) Technology in Sunscreen Spray

Leave a message

 

news-1266-712

When Do You Need to Use Sunscreen Spray?

Sunscreen spray should be used anytime you're exposed to the sun for extended periods or in situations where UV protection is important. Here are some scenarios when sunscreen spray is especially useful:

1.Outdoor Activities: If you're going to be outdoors for long periods-whether it's at the beach, hiking, or participating in sports-sunscreen spray provides quick and even coverage to protect your skin from harmful UV rays.

2.Swimming: Sunscreen sprays are often water-resistant, making them ideal for swimming or water sports.

3.On-the-Go Application: Sunscreen sprays are great for people who are on the move because they are quick to apply and don't leave a greasy or sticky residue.

4.Reapplication: Sunscreen should be reapplied every two hours, or more frequently if you're sweating or swimming. Sunscreen spray makes reapplication easy, especially on areas that are harder to reach, like the back.

 

How Do You Choose Sunscreen Spray?

When selecting a sunscreen spray, it's important to consider a few key factors to make sure it suits your skin type, activity level, and environmental exposure. Here's how to choose the right one:

1.SPF (Sun Protection Factor):

*Choose a sunscreen with at least SPF 30 for general daily use.

*For longer outdoor exposure or intense sunlight, consider SPF 50 or higher.

2.Broad-Spectrum Protection:

Look for a sunscreen that offers broad-spectrum protection, meaning it guards against both UVA and UVB rays. UVA rays age your skin and increase the risk of skin cancer, while UVB rays cause sunburn.

3.Water-Resistance:

If you plan to swim or sweat a lot, choose a water-resistant sunscreen. Look for terms like "water-resistant for 40 minutes" or "water-resistant for 80 minutes."

4.Skin Type Considerations:

*If you have sensitive skin, choose a sunscreen spray labeled as hypoallergenic or formulated for sensitive skin.

*Oily skin? Look for an oil-free or non-comedogenic spray to avoid clogging pores.

*For dry skin, consider a hydrating sunscreen that includes moisturizing ingredients like glycerin or aloe vera.

5.Spray Quality:

Make sure the spray produces a fine mist that provides an even coat. This helps prevent uneven coverage and ensures the sunscreen works effectively.

6.Environmental and Health Considerations:

*If you're concerned about environmental impact, look for reef-safe sunscreens, as some ingredients in traditional sunscreens can harm marine life, especially coral reefs.

*Choose a non-aerosol spray if you prefer to avoid propellants and chemicals in the air.

 

How Is Sunscreen Spray Filled?

Sunscreen sprays are filled using aerosol filling technology. Here's how the process typically works:

1.Preparation of Ingredients: The active sunscreen ingredients (e.g., avobenzone, octinoxate) are mixed with carriers, emulsifiers, and stabilizers to form the sunscreen formula. In the case of spray sunscreens, the formulation is typically more liquid than cream-based sunscreens.

2.Filling:

Step 1: Preparation of Components

news-1067-600

The can itself is typically made of metal, like aluminum or steel, and needs to be pre-cleaned and prepared for filling. The can should be free from any contaminants, ensuring the product is dispensed safely and hygienically.BOV packaging is preferred for personal care products due to its ability to maintain product quality, provide hygienic dispensing, offer precise control, and enhance the overall user experience. It helps prevent contamination, prolongs shelf life, and ensures consistent, clean application, meeting the needs of both manufacturers and consumers.

 

Step 2: Position the BOV Inside the Container

The BOV bag is typically pre-formed and fitted with a valve neck. The bag is carefully positioned within the aerosol can, ensuring that the bag is correctly aligned with the valve assembly. The flexible bag is inserted into the can, and its neck is aligned with the can's valve opening. This is usually done with a machine that positions the bag inside the can with high precision.

 

Step 3: Introduce Pressure into the Container

Once the BOV is in place, the next step is to pressurize the container. Propellant gas, such as compressed air or nitrogen, is injected into the space outside the bag. The choice of propellant is based on the desired spray characteristics and product requirements. This pressurization creates the necessary force for the product to be dispensed when the valve is activated, ensuring the BOV system operates as intended.

 

Step 4: Crimp and Seal the Valve

After the container is pressurized, the valve is crimped and sealed to the container's opening. This step ensures an airtight seal, preventing any leakage of the propellant or product. A precise crimping process is critical for maintaining internal pressure and ensuring long-term reliability. Any faults in this seal could lead to pressure loss or contamination, undermining the product's quality and effectiveness.

 

news-1266-712

 

Step 5: Fill the BOV with Product

Following the sealing of the valve, the product is carefully filled into the bag through the valve. The BOV system's design ensures that the product does not mix with the propellant, which is particularly important for sensitive products that could degrade if exposed to propellant gases. This stage is carefully controlled to ensure the correct dosage is filled, preserving the product's integrity and ensuring consistent dispensing with each use.

Step 6: Perform a Water Bath Leak Test

To confirm the integrity of the sealed container, a water bath test is conducted. This involves submerging the filled containers in water and inspecting for bubbles that may indicate leaks. This test is a reliable way to verify the quality of the sealing process. Ensuring there are no leaks is essential for maintaining the product's shelf life and safety, as well as ensuring that the container can retain its internal pressure without contamination.

Step 7: Attach the Actuator and Cap the Container

In the final step, the actuator (spray nozzle) is fitted onto the valve stem, controlling the spray pattern and product release. The actuator must be securely attached to ensure accurate and consistent dispensing. A protective cap is then placed on the container to safeguard the actuator, prevent accidental discharge, and maintain cleanliness. This assembly finalizes the product, making it ready for packaging and distribution.

3. Water Bath Leak Test

To ensure there are no leaks in the sealed container, a water bath test is conducted. The filled and sealed containers are submerged in water, and if there are any bubbles or signs of leakage, the container fails the test. This step ensures that the product remains stable and secure throughout its shelf life.This test is crucial to maintaining the product's quality and ensuring that it's safe for consumer use.

4. Attaching the Actuator and Cap

Once the container passes the water bath test, the actuator (or spray nozzle) is attached to the valve. The actuator is designed to control the flow and spray pattern of the sunscreen when the user presses it.After the actuator is attached, a protective cap is placed over the nozzle. This cap serves multiple purposes: protecting the nozzle from damage, preventing accidental discharge, and ensuring the spray mechanism remains clean and ready for use.

5. Final Inspection and Packaging

The final product is inspected for any defects, ensuring that the packaging is intact, the actuator works properly, and the product is dispensed correctly. The sunscreen spray is also checked for consistency in spray pattern and amount dispensed per use. Once the product passes all quality checks, it is packaged for shipment to distributors or directly to consumers.

The Meitar brand Bag-On-Valve (BOV) aerosol filling machine has a production speed range from 10 to 90 cans per minute (CPM), making it highly flexible for various production needs. This adjustable speed allows manufacturers to tailor the filling process based on factors such as product demand, formulation type, and packaging requirements.

Key Features and Benefits:

Flexible Production Speed: With speeds ranging from 10 to 90 CPM, the machine can handle both small and large production volumes efficiently. This flexibility is ideal for businesses that need to scale production based on changing demand or market conditions.

Precise Filling for BOV Systems: The BOV system ensures that the product (such as sunscreen, deodorant, or air fresheners) is kept separate from the propellant, maintaining product integrity and stability. The precise filling system ensures that each can is filled accurately with the correct amount of product and propellant.

Consistent Quality Control: Despite the variable speed, the Meitar machine maintains high levels of consistency in filling and sealing, ensuring that each aerosol can meets quality standards. This is crucial for products that require strict formulation control, such as medical or cosmetic items.

Versatility for Different Applications: The machine can be used for a wide range of BOV products, from personal care items to cleaning products, providing a versatile solution for different industries.

Optimized for Efficiency: The machine is designed for high efficiency with minimal downtime, thanks to its advanced automation and control systems. The speed range allows manufacturers to find an optimal balance between throughput and production quality.

news-1266-712

Do you have a specific application in mind for the Meitar BOV machine? It could help to fine-tune your production strategy!

Contact Information

Meida Filling Machinery Company

Jimmy

Phone: +86 13626120188

Email: psh@jsmeida.com

Website: www.meitarmachine.com

Send Inquiry