English  |
| Quantity: | |
|---|---|
QGQ750
MEITAR
Product Description
Full automatic aerosol spray can filling machine line consist of
1cans arranging machine,
2 liquid filling machine,
3 valve sorting & inserting machine,
4 valve crimping and gas filling machine,
5 automatic weighing machine,
6 water bath leakage tester,
7 actuator presser,
8 capping machine,
9 ink jet printer,
10 packing table, etc. Propellants could be LPG, DME, CO2, N2, compressed air, etc,
Widely applied in spray paint, air freshener, insecticide, body spray, car care spray, cosmetics, food aerosols etc.
Technical Parameter | |
| Filling Capacity | 2400-3600CPH |
| Filling Precision | ≤±1% |
| Liquid Filling Volume | 30-700ml |
| Gas Filling Volume | 30-700ml |
| Applicable can diameter | 35-71mm |
| Applicable can height | 85-330mm |
| Max. Air Consumption | 3-5m3/min |
Advantage
1.Stainless steel 304 manufactured by machine both Liquid metering system and Gas metering system.
2.reliable crimping quality .
3.accurate filling dosage .
4.addtional boost pump for propellant liquefaction .
5.Fully pneumatic controlled ,easy operating and simple machine serving , low investment for customer.
Why do you choose Air freshener filling machine?
In the international market, the Air freshener filling machine has had international general standards for 30 or 40 years. The entire industry chain has been developed very closely and maturely, and the leakage rate and defect rate of products have been reduced to a very low level; in terms of quantity, Air freshener filling machine has a wide range of applications and a variety of product types, covering skin care, personal care, home, automobile, industrial supplies, medicine, etc. Air freshener filling machine is about 30% lower than the cost of traditional machines in terms of the cost of packaging materials.
Cosmetics companies that produce Air freshener filling machines need to have aerosol and organic solvent units (aerosols, organic solvents) project licenses in the cosmetics production license information, and follow the safety production regulations for hazardous chemicals, which is very important for many companies. , especially for new entrants, is a very high threshold. As environmental protection and safety requirements are getting higher and higher, there are fewer and fewer manufacturers of Air freshener filling machines approved for new approvals, so it is necessary to choose established manufacturers.
Our Service
1.One year warranty
2.Engineers available to service machinery overseas;
3.Professional sellers are always at your service;
4.We can provide customer factory plan,layout, installation,training and so on.
Company Information
1 Standardized workshop of total 30,000 square meters.
2.verification Certificates of equipments: IS09001:2001; CE Certificate, SGS Certificate, Logo trademark registration, etc.
3.The machines will be tested and run for 24 hours before leaving the factory, to ensure the smooth working of liquid and gas pipeline, and pneumatic, electrical and mechnical stability.
4. Sufficient stock of spare parts ensures the timely delivery and supply of spare parts.
5.The engineers are experienced. We can produce diferent products with different capacity and work out reasonable flow chart as per customers' requirements to save space.
6.Professional installation team can help customers make benefits in a shortest time.
FAQ
Q1:Are you a factory or trading company?
A1: We are a factory specialized in aerosol filling machine, such as spray print, insecticide, ect.
Q2:Where is your factory location? How can I visit there?
A2:Meida Filling Machinery CO.,LTD is located in Yangzhou, China. You could visit us by air to Yangzhou Airport then we will pick you up to our factory.
Q3:How does your factory do regarding quality control?
A3:Quality is priority. People from Meitar always attach great importance to quality controlling from the beginning to the end.
we support to inspect machine before shipment Our factory has gained TUV and ISO authentication.
Q4:What's the guarantee if we purchase from you?
A4:All the equipment ordered from us will provide one year guarantee from the delivery date .If there is any wearing part be broken within the warranth and isn't caused by improperly operation then we would offer then new parts for free.
Q5:How about the after service?
A5:There's no problem we could send our engineer to install or fix the machine locally in due course but customer need to pay the round air tickets cost and arrange the hotel accommodation for our engineer.
More information, picture and design layout, please contact with us.
Product Description
Full automatic aerosol spray can filling machine line consist of
1cans arranging machine,
2 liquid filling machine,
3 valve sorting & inserting machine,
4 valve crimping and gas filling machine,
5 automatic weighing machine,
6 water bath leakage tester,
7 actuator presser,
8 capping machine,
9 ink jet printer,
10 packing table, etc. Propellants could be LPG, DME, CO2, N2, compressed air, etc,
Widely applied in spray paint, air freshener, insecticide, body spray, car care spray, cosmetics, food aerosols etc.
Technical Parameter | |
| Filling Capacity | 2400-3600CPH |
| Filling Precision | ≤±1% |
| Liquid Filling Volume | 30-700ml |
| Gas Filling Volume | 30-700ml |
| Applicable can diameter | 35-71mm |
| Applicable can height | 85-330mm |
| Max. Air Consumption | 3-5m3/min |
Advantage
1.Stainless steel 304 manufactured by machine both Liquid metering system and Gas metering system.
2.reliable crimping quality .
3.accurate filling dosage .
4.addtional boost pump for propellant liquefaction .
5.Fully pneumatic controlled ,easy operating and simple machine serving , low investment for customer.
Why do you choose Air freshener filling machine?
In the international market, the Air freshener filling machine has had international general standards for 30 or 40 years. The entire industry chain has been developed very closely and maturely, and the leakage rate and defect rate of products have been reduced to a very low level; in terms of quantity, Air freshener filling machine has a wide range of applications and a variety of product types, covering skin care, personal care, home, automobile, industrial supplies, medicine, etc. Air freshener filling machine is about 30% lower than the cost of traditional machines in terms of the cost of packaging materials.
Cosmetics companies that produce Air freshener filling machines need to have aerosol and organic solvent units (aerosols, organic solvents) project licenses in the cosmetics production license information, and follow the safety production regulations for hazardous chemicals, which is very important for many companies. , especially for new entrants, is a very high threshold. As environmental protection and safety requirements are getting higher and higher, there are fewer and fewer manufacturers of Air freshener filling machines approved for new approvals, so it is necessary to choose established manufacturers.
Our Service
1.One year warranty
2.Engineers available to service machinery overseas;
3.Professional sellers are always at your service;
4.We can provide customer factory plan,layout, installation,training and so on.
Company Information
1 Standardized workshop of total 30,000 square meters.
2.verification Certificates of equipments: IS09001:2001; CE Certificate, SGS Certificate, Logo trademark registration, etc.
3.The machines will be tested and run for 24 hours before leaving the factory, to ensure the smooth working of liquid and gas pipeline, and pneumatic, electrical and mechnical stability.
4. Sufficient stock of spare parts ensures the timely delivery and supply of spare parts.
5.The engineers are experienced. We can produce diferent products with different capacity and work out reasonable flow chart as per customers' requirements to save space.
6.Professional installation team can help customers make benefits in a shortest time.
FAQ
Q1:Are you a factory or trading company?
A1: We are a factory specialized in aerosol filling machine, such as spray print, insecticide, ect.
Q2:Where is your factory location? How can I visit there?
A2:Meida Filling Machinery CO.,LTD is located in Yangzhou, China. You could visit us by air to Yangzhou Airport then we will pick you up to our factory.
Q3:How does your factory do regarding quality control?
A3:Quality is priority. People from Meitar always attach great importance to quality controlling from the beginning to the end.
we support to inspect machine before shipment Our factory has gained TUV and ISO authentication.
Q4:What's the guarantee if we purchase from you?
A4:All the equipment ordered from us will provide one year guarantee from the delivery date .If there is any wearing part be broken within the warranth and isn't caused by improperly operation then we would offer then new parts for free.
Q5:How about the after service?
A5:There's no problem we could send our engineer to install or fix the machine locally in due course but customer need to pay the round air tickets cost and arrange the hotel accommodation for our engineer.
More information, picture and design layout, please contact with us.
